MINIMOTO ATV, Instruction Manual

Page: 8 / 31

MINIMOTO
™
ATV
MINIMOTO
™
ATV MINIMOTO
™
ATV MINIMOTO
™
ATV
VEHICLE SET UP AND
ASSEMBLY:
CAUTION: The included tools to set up
and charge the Minimoto™ ATV should be
used by an ADULT ONLY. The package con-
tains some small parts. Keep away from
small children.
1) Completely remove the Minimoto™ ATV
and all
contents
from the
package.
(Fig 1)
Remove
and dis-
card the
protective
cardboard covering from the handlebars.
2) Find and identify
the following tools
and hardware (Fig 2)
3) Take the steering arm and place it in the
clamp (Fig 3)
4) Tighten the steering arm using the
Allen key in the tool kit (Fig 4).
5) Under the seat, remove the rubber band
that holds
the connec-
tors and
snap togeth-
er the two
connectors
(Fig 5).
6) From the left side of the vehicle, locate
the two screws holding the Battery box
together (Fig 6). Using a phillips head
screwdriver, unscrew these screws and
remove the left half of the battery box off
the vehicle (F ig 7).
7) Place the connector assembly inside
the battery
box with only a
wire protruding
from the top
(Fig 9).
8) Place the left half of the battery box
back on the vehicle and retighten the
screws (Fig 10).
6
Fig 1
Fig 2
Fig 3
Fig 4
Fig 6
Fig 7
Fig 9
Fig 5
Fig 10