miniDSP Ltd, Hong Kong /
/ Features and specifications subject to change without prior notice
9
2
B
OARD
L
AYOUT AND
C
ONNECTIVITY
This section describes the board and its interfaces.
2.1
B
OARD LAYOUT
This diagram shows the layout of the nanoSHARC board.
2.2
DC
POWER
Provide DC power between pins 9 and 10 (ground) and pins 11 and 12 (12 V DC) of header J2. The supply voltage
must be 12V DC, or the board may malfunction or be damaged. The power supply must be capable of supplying
at least 300 mA at 12V DC.
2.3
USB
CONNECTIVITY
Connect the mini USB port (mini type B) to a computer to configure the board. The USB port also provides
asynchronous USB Audio (Class 2) streaming at all standard sample rates from 44.1 to 192 kHz. USB Audio input
is selected from within the plugin or via remote control.
2.4
O
PTICAL DIGITAL AUDIO INPUT
Connect the optical port to a digital source. Thanks to the onboard ASRC (asynchronous sample rate converter),
sample rates from 20 to 216 kHz are accepted. Optical digital audio input is selected from within the plugin or
via remote control.
