miniDSP NANOSHARC User Manual Download Page 42

Page: 42 / 46

miniDSP Ltd, Hong Kong /

www.minidsp.com

/ Features and specifications subject to change without prior notice

7.2

IRMWARE UPGRADE

miniDSP may occasionally provide an upgrade to the nanoSHARC MCU firmware to enable new features. To
upgrade the MCU firmware, first download the latest version of the nanoSHARC software package from the

User

Downloads

section of the miniDSP website, then extract it on your computer (on Windows, right-click and select

“Extract All...”; on Mac, double

-click).

DO NOT DISCONNECT THE USB CABLE OR POWER FROM THE

nanoSHARC

WHILE FIRMWARE UPGRADE

IS IN PROGRESS. DOING SO MAY “BRICK” YOUR

nanoSHARC

7.2.1

Windows

Connect the nanoSHARC (or Kit) to your computer via USB (if not already connected) and power it on.

Navigate to the

XMOS_Firmware\Firmware_Upgrade_Tools\Windows\miniDSPUAC2Dfu

folder of the

software download.

Double-click on the

miniDSPUAC2Dfu.exe

program to run it:

Summary of Contents for NANOSHARC















































Search results

Summary of Contents for NANOSHARC

Reviews:

Related manuals for NANOSHARC

Brands by name

Popular brands

miniDSP NANOSHARC, User Manual

Search results

Summary of Contents for NANOSHARC

Reviews:

Related manuals for NANOSHARC

Brands by name

Popular brands