miniDSP Ltd, Hong Kong /
/ Features and specifications subject to change without prior notice
37
and/or the amount of boost in the EQ blocks.
6
Audio is coming through
the wrong outputs
a.
Check the cabling from the processor to your amplifiers.
b.
Check the cabling from your source/s.
c.
Check that you have correctly set up the matrix mixer to send
the correct inputs to the correct outputs.
7
Cannot reload a
configuration
a.
Confirm the file format of your file (.xml).
b.
Confirm the version of the file.
6.3
MCU
FIRMWARE UPDATE
miniDSP may periodically provide an update to the
C-DSP 6x8
MCU firmware to enable new features. The most
recent MCU firmware is always included in the installation folder of the plug-in download. To update the
firmware:
1.
Connect a microSD card to the computer and copy the .hex firmware file onto it. The card will need to
have been formatted in FAT format.
2.
Power off the
C-DSP 6x8
. Insert the microSD card into the slot. (It pushes in and latches.) Power on the
C-DSP 6x8
.
3.
The C-DSP will load new firmware.
4.
Eject the microSD card. (Push it in gently to unlatch it, then pull it out.) The C-DSP 6x8 is ready for use
with new firmware.
6.4
O
BTAINING SUPPORT
1.
Check the forums on miniDSP.com to see if this issue has already been raised and a solution provided.
2.
Contact miniDSP via the support portal at
a.
The specific product you are having an issue with (in this case, C-DSP 6x8).
b.
A clear explanation of the symptoms you are seeing.
c.
A description of troubleshooting steps (see
