... and
fi
x with hex screws and nuts.
With a felt tip pen mark from the under
side the edges of the seat that are over
hanging the bottom plate.
Remove the seat from the model and ca-
refully cut and
fi
le along the lines.
For best results use a pair of Dubro round-
ed scissors.
To
fi
t the pilots seat belt, drill a series of
2.5mm holes in a row and then use a
fl
at
needle
fi
le to join the holes into a slot.
To mount the pilot use the elastic strip
supplied in the kit. First, the band should
be
fi
tted
fl
at over the seat without the pilot.
Depending on which pilot is used a trial
fi
t-
ting is necessary. When happy, the elastic
strip can be sewn together at the back of
the seat.
