Minibar Systems
SmartFridge 65 Solid Door – Electronics on Door
DOC0118_SmartFridge 65 Solid Door - Electronics on Door_Rev-5.doc
Page 5
5.
Use of the LED Control Panel
5.1
Display
The front panel consists of two LEDs (Green and Red), and a three character, seven-segment, LED display. The
LEDs signify different operating conditions detailed below. The display shows the current temperature in the
first two characters with the last character showing either “F” or “C” for Fahrenheit and Celsius. The left
decimal point indicates the compressor is OFF. The right decimal point indicates the compressor is ON. “EL”
indicates the temperature probe circuit is open. “EH” indicates the temperature probe has a short circuit.
5.2
Buttons
ON/OFF
– Pressing the ON/OFF button will turn the SmartFridge on or off.
SNOOZE
– Pressing the SNOOZE button will cause the SmartFridge to set the internal temperature to 50°F/
10°C) for eight hours so the compressor does not run as often.
QUICK COOL
– Pressing the QUICK COOL button will cause the SmartFridge to drive the internal temperature
to 34°F/1°C. Once reached, the SmartFridge will operate in ON mode.
°F/°C
– Pressing and holding the QUICK COOL button for five seconds will toggle the temperature display
between degrees Fahrenheit or Celsius.
5.3
Modes
DOOR
– Opening or closing the door will turn the interior lights on or off.
ON
– The SmartFridge will chill between 35°F/2°C and 39°F/4°C. You can enter this mode by pressing the
ON/OFF button from the ON mode. The green LED will be turned on while in this mode and the current
temperature will be displayed. When the unit is put into service it is in the ON mode by default. The default
temperature is 37°F/3°C ± 1°C.
OFF
– The SmartFridge will chill between 58°F/14°C and 61°F/16°C. You can enter this mode by pressing the
ON/OFF button from ON mode. The red LED will be turned on and the display will be blank. The default
temperature is 59°F/15°C ± 1°C.
STOP
– Press and hold the ON/OFF button for three seconds from the ON mode to shut down the
SmartFridge. The red LED will flash for five seconds then turn off and the display will be blank.
SNOOZE
– The SmartFridge will chill between 48°F/9°C and 52°F/11°C for eight hours. You can enter this
mode by pressing the SNOOZE button from ON or QUICK COOL modes. The red LED will flash until SNOOZE
is complete. Upon completion, the SmartFridge will return to the ON mode. The default temperature is
50°F/10°C ± 1°C.
