Mini MINI E, Owner'S Manual, Page: 59 / 120

REFERENC
E
AT
A
GL
AN
C
E
CO
NT
R
O
LS
D
R
IV
ING
TI
P
S
MOB
IL
ITY
57
8. Briefly press the button to select:
>
Daytime running lamps activated.
>
Daytime running lamps deactivated.
9. Press the button for a longer period.
The setting is stored.
Xenon lamps
The headlamp range is controlled automatically,
e.g. when accelerating and braking, and for dif-
ferent cargo loads.
High beams/roadside
parking lamps
1 Turn signals/roadside parking lamps
2 Switching on high beams
3
Switching off high beams/headlamp flasher
Roadside parking lamps, left or right
The vehicle can be illuminated on one side for
parking. Comply with local regulations when
doing so.
Switching on
After parking the vehicle, press the lever up or
down, arrow
1 .
The roadside parking lamps discharge the
12 volt battery. Therefore, do not leave
them on for unduly long periods of time, other-
wise the battery might not have enough power
to start the motor.
<
Switching off
Press the lever up or down to the pressure point.
Instrument lighting
You can adjust the brightness of the instrument
lighting only when the parking lamps or the low
beams are on.
Increasing brightness
Press and hold the button until the desired
brightness is reached.
Reducing brightness
Press the button briefly.
The brightness decreases every time the button
is pressed briefly.
Interior lamps
The interior lamps and footwell lamps are con-
trolled automatically.
To avoid draining the 12 volt battery, all
lamps inside the vehicle are switched off
approx. 8 minutes after the ignition is switched
off, refer to Start/stop button on page
32 .
<
Online Edition for Part no. 01 41 2 601 475 - © 11/08 BMW AG