Mini Cooper S ALL4, Owner'S Manual, Page: 50 / 196

Controls
Driving
48
4. Press the button as often as necessary until
the symbol and "SET" are displayed.
5. Press and hold the button until the display
changes.
6. Press the button to select the desired sensi-
tivity.
7. Wait, or press and hold the button until the
display changes.
The settings are stored.
Deactivating intermittent wipe or rain
sensor
Press the button again, arrow 3 .
Brief wipe
Press the lever downward once, arrow
2
.
Cleaning windshield and headlamps*
Pull the lever, arrow 4 .
Washer fluid is sprayed onto the windshield and
the wipers are operated briefly.
When the vehicle lighting system is switched on,
the headlamps are cleaned at regular and
appropriate intervals.
In cars equipped with an alarm system, the
headlamps cannot be cleaned when the hood is
open.
Do not use the washers when the washer
fluid reservoir is empty; otherwise, you will
damage the washer pump.
Only use the washers if the hood has been com-
pletely closed; otherwise, the headlamp washer
system
*
may be damaged. Do not use the
washers if there is any danger that the fluid will
freeze on the windshield. If you do, your vision
could be obscured. For this reason, use anti-
freeze.
<
Window washer nozzles
The window washer nozzles are heated auto-
matically
*
while the engine is running or the
ignition is switched on.
Rear window wiper
0 Rear wipers parked
1 To switch on intermittent wipe :
Turn the cap to level 1 .
Operation is continuous in reverse gear.
The rear wiper does not move if the cap is in
interval stage
1 before the ignition is switched
on.
Cleaning the rear window
2 To clean the rear window during intermit-
tent wipe
:
Turn the cap further to level
2
and hold it
there.
3
To clean the rear window when wipers are
parked
:
Turn the cap to level
3
and hold it there.