Mini CONVERTIBLE Owner'S Manual Download Page 208

Page: 208 / 324

To defrost windows and remove

condensation

Make the following settings to defrost the

windows and remove condensation:

–

Direct the air distribution onto the win-

dows.

–

Increasing the air flow.

–

Increase the temperature.

–

Switch on air conditioning if needed.

Heated windshield

Press the button. The LED lights up.
The heated windshield switches off

automatically after a certain period of time.

Rear window defroster

Press the button. The LED lights up.
The rear window defroster switches

off automatically after a certain period of

time.

When GREEN driving mode is activated,

the heater output is reduced.

Microfilter

In external and recirculated-air mode, the

microfilter filters dust and pollen from the

air.
Have this filter changed during vehicle

maintenance, refer to page

280

Automatic climate control

1 Temperature, left
2 Display
3 Air flow, AUTO intensity
4 AUTO program

5 Air distribution, manual
6 Display
7 Temperature, right
8 Seat heating, right

Seite 208

CONTROLS

Climate control

208

Online Edition for Part no. 01405A53AA0 - II/22

Summary of Contents for CONVERTIBLE





































































































































































































































































































































Search results

Summary of Contents for CONVERTIBLE

Reviews:

Related manuals for CONVERTIBLE

Brands by name

Popular brands

Mini CONVERTIBLE, Owner'S Manual

Search results

Summary of Contents for CONVERTIBLE

Reviews:

Related manuals for CONVERTIBLE

Brands by name

Popular brands