HOW TO SET UP THE DEVICE
1.
In the same area in which the On/Off switch is located, there
should be a slot for a micro SD card that’s labelled “TF.” Insert
a micro SD card into this slot.
2.
Plug the device in to charge it. It will then begin to send out a
Wi-Fi signal within about five minutes.
3.
Follow the instructions below to continue setting up the
camera.
HOW TO LINK THE CAMERA-CLOCK TO YOUR ANDROID PHONE VIA THE
P2PLiveCam APP
1.
Enter the Android app store.
2.
Select the following option:
3.
Type in “P2PLiveCam,” using this exact capitalization.
4.
Select the following option:
