Updated 04/11/2018
4
Version 1.3
HOW TO CHARGE THE VRUSB
1.
Connect the recorder’s USB connector to a computer or
other charging device. When the battery is fully charged,
the indicator light will be solid red (no flashing).
a.
Once fully charged, the device can record for 30
hours.
b.
When the battery is low, the red light will flash,
and you will need to recharge the battery.
OPERATING THE VRUSB
HOW TO TURN ON THE VRUSB
1.
Switch the “Recording Switch” to “REC”.
2.
After 2 seconds, the red indicator light will turn on, then
turn off once more.
3.
The unit is now recording.
HOW TO STOP RECORDING
1.
Flip the “Recording Switch” to the “STOP” position.
2.
The device will stop recording and save the file.
HOW TO SET TIME/DATE STAMP
1.
Plug the device into your computer via the USB port.
2.
Locate the “Removable Disk” inside the (My) Computer
folder.
a.
Open the folder to view the files.
3.
Double click the “SetTimeDate” file on the removable
device.
4.
A new window will pop open. Confirm that the date and
time displayed are correct and click “okay”.
