4
Version 1.0
OPERATING THE CAMERA
HOW TO TURN ON THE CAMERA
1.
Make sure the unit is plugged in and receiving power.
2.
Point the remote at the device and press the power
button on the remote. The Green light will blink once and
then the Red light will blink 3 more times and turn off (if
motion is detected immediately). The device is now in
motion detection mode.
NOTE: If the light doesn’t come on, try many different
angles when pressing the power button and pointing it at
the front/top of the unit.
NOTE: Do not hold down the power button, press and
release the button only.
3.
To put the device into standby mode, stop motion
recording by pressing the motion detection button one
time. The Green light will come on and the device will be
in standby mode.