11
Version 1.3
sensor”, which relies on measures of infrared light to
detect motion.
Note: Only OmniX products come with a PIR sensor
installed. OmniEye products do not come with this
feature.
1.
While the camera is in Standby Mode, press the
“PIR Sensor” button.
2.
If motion is detected, the indicator light will
flash, then turn off.
3.
The device is now in PIR sensor mode.
4.
If you wish to turn it off PIR sensor mode, press
the “PIR Sensor” button once more. The
indicator light will flash, and the camera is now
in standby mode.
HOW TO STOP RECORDING MOTION DETECTION
1.
While the camera is recording motion
detection, press the “Motion Detection” button
once more. (The
Indicator LED
will turn on.)
2.
The camera has stopped recording motion
detection and is now in Standby Mode.