12
Version 1.4
3.
The device is now in PIR sensor mode.
4.
If you wish to turn it off PIR sensor mode, press
the “PIR Sensor” button once more. The
indicator light will flash, and the camera is now
in standby mode.
CHANGING YOUR DEVICE SETTINGS (INCLUDING THE
DATE/TIME STAMP)
Your OmniBottle comes with an A/V cable that is used
to connect the device to a monitor/TV so that you can
adjust various settings.
1.
Connect your device to a monitor/TV using the
provided A/V Cable. (See page 3 to locate the
AV port in your device.)
2.
Power on the device.
3.
Press the motion detection button to stop
recording and put the device in standby mode.
4.
Press the “MENU” button on the remote.
5.
A menu will display on the screen with various
options (Use OK, UP, Down, and Menu on the
remote to navigate the menu system):