Updated 04/05/2018
2
Version 1.0
GETTING TO KNOW YOUR OMNIAC1080P
OPERATING THE OMNIAC1080P
BEFORE YOU START
1.
Before you begin, you must insert an SD Card into the unit.
2.
To do so, remove bottom cap to reveal the MicroSD card slot.
GETTING STARTED
1.
Begin by plugging your device into a power outlet.
2.
Once you device is plugged in, press the A button on the
remote one time. The device will beep indicating that it is
powered on.
NOTE: When the device powers on, it immediately enters into
motion detection mode.
3.
To save any active recordings and return to standby mode,
press the D button on the remote. You will hear 2 short beeps
indicating the device has left motion detection mode and
entered standby mode.
BEGINNING A NEW VIDEO RECORDING
1.
When in standby mode, you may begin a new recording by
pressing one of the video buttons.
o
To begin a motion activated recording, press the D
button one time. The device will emit one short beep
indicating it is now in motion detection mode.
o
To begin a continuous recording, press the C button
one time. The device will emit one short beep
indicating it is now in continuous recording mode.
2.
To stop recording in either mode, press the mode button that
you are currently recording in again, and the device will emit 2
