HCWifiClock Manual
The HCWifiClock should include the following accessories:
AC Adapter
USB power cable
RJ45 Ethernet adapter (RJ45 Ethernet cable is not provided)
1 software disc.
Make sure you are not missing any of these accessories. If you find that one is missing please contact the
dealer you purchased the device from within 48 hours of receiving the clock.
It is recommended that you familiarize yourself with this full manual before setting up and using the
device.
Setup
On the back of the clock, you will see a plastic covering with grooves. This piece will slide down so that it
can be removed and reveal the Wifi Clock controls. (Pictured below)
Here you can see the On and Off switch, Ethernet adapter connection (WAN), microSD card slot,
indication lights (A,B,C), 5v power connection, Wifi Protected Setup button (WPS), and the Wifi Mode
Switch (Ap / Adhoc).
You will first want to inset your microSD card into the microSD card slot. The gold contacts of the card
should face down towards the face of the clock. You will feel some spring resistance and the card should
