Updated 05/26/2016
3
Version 1.0
OPERATING THE HIGH DEFINTION EYEGLASSES
IMPORTANT NOTICE: Allow the device to charge 4-6 hours before
using. Do NOT charge the device for more than 12 hours.
HOW TO CHARGE THE EYEGLASSES
1.
Plug the USB cable into the USB port on the sunglasses.
2.
Plug the USB cable into the USB port on your PC.
The blue/red indicator light will turn on while charging.
Light will be solid blue when fully charged.
HOW TO TURN ON THE EYEGLASSES
1.
Push and hold the Power Button for 2 seconds.
The blue indicator light will turn on.
The eyeglasses are on and in
standby mode
.
If you do not use the eyeglasses for one minute, the
eyeglasses will automatically turn off.
TIP: If the blue indicator light is flashing, you need to insert a
MicroSD Card into the MicroSD Card Slot
HOW TO RECORD VIDEO
1.
Ensure that you have inserted a MicroSD Card into the MicroSD
Card slot.
2.
Put the eyeglasses in
standby mode
.
3.
Push the power button one time.
The blue indicator light with flash 3 times and turn off.
The eyeglasses are recording live video.
HOW TO STOP RECORDING VIDEO
4.
Push the Power Button.
The blue light comes back on, and the unit has
returned to standby mode.
HOW TO RESET THE TIME AND DATE STAMP
1.
Plug the device into your PC using the USB cable.
2.
Turn on the device.
3.
Locate “Removable Disk” inside the (My) Computer folder.
Go to Start > Computer > Removable Disk
4.
Open the Removable Disk drive.
5.
Right click with your mouse.
6.
Scroll down to “New”.
7.
Click “Text Document”.
8.
Rename “New Text Document” as “time”.
The title must be in all lowercase letters!
Before Step 8
