5
Version 1.1
HOW TO TURN ON THE BUSHBABY CAMERA
1.
Press the Power Button on the remote control
one time. Your device is on when the led
indicator on the circuit board turns on. The
device is now in Standby mode.
a.
To see the LED you may need to be in
a darkened room as the light is inside
the out on the circuit board.
HOW TO RECORD VIDEO ON THE BUSHBABY CAMERA
1.
In standby mode, press the Video button on
the remote control one time. The indicator
light inside of the device will flash three times
and then turn off. Videos will be recorded
continuously and saved in 20 minute intervals.
HOW TO SET UP MOTION DETECTION
1.
In Standby mode, press the Motion Detection
button one time. The indicator light will flash
three times and then turn off. In Motion
Detection mode, when there is no movement,
the light will blink rapidly. Once the detector
finds movement, the light will blink three times
