4
Version 2.0
BEFORE YOU START
To preserve battery power, your device will come with the
battery connector disconnected. Before attempting to use the
device be sure to connect the battery’s connector to the circuit
board power lead.
OPERATING THE BUSH BABY 2 CLOCK
IMPORTANT NOTICE: Allow the device to charge 6 – 8 hours
before using.
MICROSD CARD SLOT
To access the MicroSD Card Slot you must remove the back
cover of the clock.
1.
Gently push the MicroSD Card into the slot. The gold
contacts on the card will be inserted first, and they
should face the main circuit board. You will feel some
spring resistance before the card clicks in to place.
2.
Never force the card into the Card Slot under any
circumstances, otherwise the clock unit or the MicroSD
card itself will be damaged.
3.
To remove the SD card, gently push the card in so that
it clicks.
