6
Version 2.0
3.
To remove the SD card, gently push the card in so that
it clicks.
4.
The internal spring tension will eject the card.
REMOVING AND CHARGING THE BATTERY
1.
Remove battery from the inside of the Bird House.
2.
Disconnect the battery connector that is connecting
the battery to the circuit board. Be careful not to pull
on the wires as that could damage them.
3.
Connect the connector on the battery to the connector
on the charging adapter.
4.
Plug the provided USB cable into the other end of the
charging adapter.
5.
Plug the other end of the USB cable into the wall AC
adapter and plug it into the wall.
6.
Wait 6 to 8 hours or until the indicator light turns from
red to green. Until the light is green, the unit is not
fully charged.
a.
The larger the battery capacity, the longer it
takes to charge.
HOW TO TURN ON THE BUSHBABY BIRD HOUSE CAMERA
