3.3.4.3
USB-4SPDT-A18
/
RC-4SPDT-A18 as two SP3T switches
Connect RF cables A and B as shown in
Fig. 3.3.4.3.
Clicking on the buttons on the right will
change the state of the switches accordingly and the signal path and will be highlighted in
green. In order to return to the main window, click on the ‘Back to Main’ button.
A
Page 26 of 33
AN-49-001 Rev.: A (November 25, 2014) M149081 (R88277) File: AN-49-002(A).doc
This document and its contents are the property of Mini-Circuits
Figure 3.3.4.3:
USB-4SPDT-A18 as two SP3T
B
3.3.5
USB-8SPDT-A18
/
RC-8SPDT-A18
This model has eight absorptive SPDT switches and can be configured in many different
configurations in similar fashion to those shown in previous sections in addition to the default
configuration of eight independent SPDT switches. In the default configuration each switch
state can be changed independently by either clicking on the button above the
corresponding switch drawing (the button will change between ‘COM->2’ and ‘COM->1’ to
indicate the current switch state) or in the user sequence window, opened by clicking on the
user sequence button (see
section 3.4
).
Figure 3.3.5:
USB-8SPDT-A18 main window
