AN-48-003 Rev. H (Jun 09, 2022) This document and its contents are the property of Mini-Circuits ECO-013719 Page 30 of 44
3.7
Data Recording Window
Get started by clicking the Record button on the right side of the Main Screen. The Power Meter
Recording Screen will open, with the serial number of the sensor being recorded at the top:
Figure 3.7:
Data Recording Window
# Name
Description
1
Start Recording
Now
Close record window, saving current settings. Data recording will start
immediately
2
Record
According to
Schedule
Close record window, saving current settings and schedule. Data recording
will start according to the schedule specified.
3
Browse
Open a browse window to select an existing file or navigate to the desired
path.
4
Create CSV
File
Export data in selected file to CSV file format and opens it in Excel (program
needs to be installed in the system).
5
View Graph
Open a graphical presentation of the data stored in the selected file.
6
View Data File
Open the data file selected (read only presentation).
7
Use Switch
Control Seq.
Configure a measurement sequence for a switch setup containing a source
generator and several power sensors. See
section 3.7.4
8
Test Spec
Dn/Up
If you enter specification limits in these fields data points which exceed these
limits (either above or below) will be marked in the data by an asterisk (*).
9
Record Interval
Specify the interval at which data points will be recorded, from every 10ms, to
9999 hours. Make sure the measurement speed is less than the record
interval.
10
Start/Stop
Record at:
Specify date and time at which to start/stop recording, for scheduled tests.
8
7
9
1
2
3
4
5
6
10
