Mini-Circuits HPA-272+ User Manual Download Page 2

Important Notice

 

This guide is owned by Mini-Circuits and is protected by copyright, trademark and other intellectual 
property laws.   

The information in this guide is provided by Mini-Circuits as an accommodation to our customers and may 
be used only to promote and accompany the purchase of Mini-Circuits’ Parts. This guide may not be 
reproduced, modified, distributed, published, stored in an electronic database, or transmitted and the 
information contained herein may not be exploited in any form or by any means, electronic, mechanical 
recording or otherwise, without prior written permission from Mini-Circuits.

  

This guide is subject to change, qualifications, variations, adjustments or modifications without notice and 
may contain errors, omissions, inaccuracies, mistakes or deficiencies. Mini-Circuits assumes no 
responsibility for, and will have no liability on account of, any of the foregoing.  Accordingly, this guide 
should be used as a guideline only. 

Trademarks

 

All trademarks cited within this guide are the property of their respective owners. Neither Mini-Circuits nor 
the Mini-Circuits HPA-272+ are affiliated with or endorsed or sponsored by the owners of those 
trademarks.  

Mini-Circuits and the Mini-Circuits logo are registered trademarks of Scientific Components Corporation. 

Mini-Circuits 

13 Neptune Avenue 
Brooklyn, NY 11235 
Phone: 1-718-934-4500 
Email: 

[email protected]

  

Web: 

www.minicircuits.com

  

 

 
 
Version 3/23/16 
© Mini-Circuits, 2016.  All rights reserved. 
 

 

AN-60-086    Rev.: A    (M155654)    03/23/16    File: AN60086.doc 

©Mini-Circuits, 2016.  All rights reserved. 

 

Summary of Contents for HPA-272+



















Reviews: