20
/
23
Click on the "on", and then click "Run", the system will start to color in model
automatically.
If the model is just scan face, open the state of the Face Mode. It is the way to promote
facial scan color accuracy.
In this interface, application software also provides other processing functions of 3D
model. We do not recommend using this functions here and it may reduce the accuracy of
3D model. It is recommend to repair the model after save model through repair software
by a third party.
4.7 Save
The format of export model of 3D scanning instrument is including PLY, OBJ, STL, etc. It
is needed to use 3D scanning instrument and 3D printers together usually. The format of
general export model is STL and OBJ.
No color model export
After finishing the step of 4.7, click “share”,
Click on “Export Model”, see below diagram,
