Maintenance
Some maintenance suggestions are show as below:
1.Clean the nozzle with a needle under preheating conditions. If the filament residue in the nozzle could not be
cleared 100%, please replace the nozzle.
2. Regularly add lubricating oil to lead screws, screw rod nut etc. It can minimize the wear-out failure of those
moving parts.
3. Regularly clean the filament residue and dirt on the nozzle, platform, guide rail, motor, fan etc.
4. Pay attention to the wear conditions of the D-shape wheels if they have been wort-out.
5. After finishing a printing, clean the printing platform to ensure the adhesion of the bottom layer of the model
for next printing.
6. Check the belts regularly and tighten them if necessary.
18
