Page 32
The Minelab SD2200v2
9.
Troubleshooting
Use the following table to check for problems which you can diagnose:
If you need to return your detector to Minelab for service, please supply as
many details as possible about the fault. This will enable our service
engineers to rectify the fault quickly and efficiently. Return the detector in a
cardboard box for protection.
DO NOT
forget to supply your name, address, telephone number,
purchase date and serial number when sending in detector parts for repair.
Instruction Manual
Page 33
10. Specification
Note: In the interest of product improvement, Minelab reserves the right to
make changes to this specification without notice.
Length
Maximum
1.3m
Minimum
1.1m
Weight
Complete (excl. battery)
2.4kg
Configuration
Shaftmount
Yes
HipmountNo
Transmission
Multi Period Sensing
Ground Rejection
Automatic or fixed Ground Balance
Search Mode
Motion
Controls
"On / Off"
2 Pos. Switch
Threshold
1 Turn
Audio (Shall, Norm & Deep) 3 Pos. Switch
Tone
1 Turn
Auto Tune (push button)
1 Touch
Channel (Ch1, Ch2 & Both) 3 Pos. Switch
Search (Fixed, Tracking)
2 Pos. Switch
Iron Discriminate
3 Pos. Switch
(Disc, Disc + ID & All Metal)
Level Adjust1 Turn
Audio O/P
Loudspeaker
No
¼ Headphone jack
Stereo or Mono
Batteries
6 Volt12Ah gel cell
Duration
Approx.
14 - 15hrs
Search Coil
Windings
Double D
11 Round
Weight
720g
(Other search coils are available as accessories.)
Patents
Patents apply
