manualshive.com logo in svg

Minebea Sartorius Intec Maxxis 4 PR 5500, Instrument Manual, Page: 299 / 407

Share
Download
Minebea Sartorius Intec Maxxis 4 PR 5500 Instrument Manual Download Page 299

PR 5500 Instrument Manual 

Extended Functions

Sartorius EN-289

t

y

As soon as the process is complete, an info 
window appears.

t

t

Press the [OK] soft key to return to the [System 
maintenance] menu.

6.1.3  Restoring Backup Data from External Media

This function is required to restore backup data (see Chapter 6.1.2) from external media to device.

Important

During the restoring process, all data selected on the device is overwritten with the data 
from the backup.
The following applies:

 

-

Restoring the setup data will replace all settings and therefore delete all settings made 
after the backup.

 

-

Restoring the calibration data will replace the current calibration and therefore delete 
all calibrations made after the backup.

 

-

Restoring the user management data will overwrite all users and therefore delete all 
users created after the backup.

 

-

Restoring the application data will overwrite all settings and therefore delete all settings 
made after the backup.

 

-

Restoring the database will overwrite all tables and entries in the database.

t

t

Select and confirm [System maintenance]-
[Restore] .

t

y

A selection window with available storage media 
appears.

Note

The connections to the share 
folders are only displayed if 
previously configured under 
[System setup]- [Network share 
connections].

Summary of Contents for Sartorius Intec Maxxis 4 PR 5500
























































































































































































































































































































































































































Reviews:

No comments