Minebea CSA-528, Instruction Manual

Page: 30 / 34

20 20
５．Specifications
５-１.Specifications
・Bridge power supply DC10V ＋0.9V, -0.2V
・Applicable transducers 1 piece of strain gage applied transducer(350 Ω ) only.
・Input range 0.5mV/V to 1.5mV/V
・Sensitivity 10 V output at the input of 0.5 mV/V
・Sensitivity adjustment range 2 000 times adjustable from 1/1 to 1/4
・Output voltage ±10V
・Output load resistance 2kΩ以上
・Zero adjustment range Adjustable ± 0.25 mV/V by trimmer
※ Adjustable the tare weight compensation by
mounting the resistance.
・Non-linearity 0.02%F.S.
・Temperature coefficient
Zero point ±1 μV/℃(Input conversion)
Sensitivity（SPAN） ±0.01%F.S./℃
・CALIB 0.5mV/V±0.001mV/V
・Frequency response range 1kHz（-3dB±1dB）
５-２.General specifications
・Operating temperature/humidity rang
Temperature -10℃ to 50℃
Humidity Less than 85 %RH (No condensing.)
・Power supply voltage DC24V 100mA
・Outline dimensions(W × H × D) 120mm x 140mm x 90mm (CSA-528-80-4 case)
72mm x 135mm x 70mm (CSA-528-80-2 case)
110mm x 50mm x 20mm (CSA-528)
・Weigh Approx. 800 g (CSA-528-80-4 case)
Approx. 500 g (CSA-528-80-2 case)
Approx. 50 g (CSA-528)
・Terminals 231-610（WAGO）
５-３.Standard specification at the time of shipment
・Sensitivity 10 V output at the input of 1 mV/V
５-４.Accessories
・Instruction manual 1piece
・Minus driver(small) 1piece