Minebea Intec PR 6207, Installation Manual

Page: 13 / 46

4.7 PR 6007/00 Mounting kit
4.7.1 Setting up the PR 6007/00 mounting kit
Note:
The mounting kit is not included in the equipment supplied with your load cell.
Order no. of PR 6007/00 mounting kit, see Chapter 11.2.1 .
The use of the PR 6007/00 mounting kit enables easy and safe suspension of the
weighing object.
The stable cover (18) protects the thin-walled bellows sheath. By turning the cover 180°,
the load application point can be either in the protected area or freely accessible.
The pre-stretched steel cable suspension puts the load in a stable position and
counteracts lateral forces and torques. Conical seat (11) and rounded washer (12) minimize
the risk of the rope (7) jamming at the suspension.
An adjustable overload protection (2, 3) protects the load cell from damage due to
overload.
4 Speciications Beam Type Load Cell PR 6207
Minebea Intec EN-11