Minebea Intec PR 6207, Installation Manual

Page: 27 / 46

11 Spare parts and accessories
11.1 Replacement parts
No. Description Max. capacity Order no.
1 Flexible copper thread, 400 mm long 5312 321 28057
2 Complete steel cable 10…200 kg 5322 693 90573
11.2 Accessories
11.2.1 Mounting kits
To install the load cell, the following mounting kits / pivots are recommended:
No. Description Max. capacity Order no.
1 Mounting kit PR 6007/00N 10–200 kg 9405 360 07001
2 Mounting kit PR 6007/00S 10–200 kg 9405 360 07002
N = steel zinc plated, passivated and sealed (RoHS-compliant)
S = stainless steel
11.2.2 Connecting cables
To connect the junction box to the weighing electronics, we recommend using the
following connecting cables:
No. Description Order no.
1 PR 6135/×× 9405 361 35××2
2 PR 6135/01A (armored) 9405 361 35019
3 PR 6136/×× (for installation inside the explosion-hazarded area) 9405 361 36××1
4 PR 6136/01A (armored, for installation inside the explosion-hazarded
area)
9405 361 36019
11.2.3 Cable junction boxes
We recommend using the following junction boxes:
No. Description Order no.
1 PR 6130/04 (aluminum, 1–4 load cells, IP67) 9405 361 30044
2 PR 6130/34Sa (1.4301, 1–4 load cells, IP68, IP69, veriiable) 9405 361 30344
3 PR 6130/35S (1.4301, 1–4 load cells, IP68, IP69, veriiable) 9405 361 30354
4 PR 6130/64Sa (1.4301, 1–4 load cells, IP68, IP69, veriiable, ATEX) 9405 361 30644
5 PR 6130/65S (1.4301, 1–4 load cells, IP68, IP69, veriiable, ATEX) 9405 361 30654
11 Spare parts and accessories Beam Type Load Cell PR 6207
Minebea Intec EN-25