7.2.5.6
Function number 5: device type and software version (read)
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Byte 0
TYPE MSB
Byte 1
TYPE LSB
Byte 2
MAINVERSION
Byte 3
SUBVERSION
e.g.: PR 5211 Rel 1.23 = 52200123
hex
7.2.5.7
Function number 6: serial number of the weighing point (read)
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Byte 0
Serial number MSB
Byte 1
Serial number
Byte 2
Serial number
Byte 3
Serial number LSB
e.g.: 148388723 = 08D83B73
hex
7.2.5.8
Function number 7: For internal use only.
7.2.5.9
Function number 8 to 15: weight data (read)
The gross, net, and tare weight are stored as a DINT fix point. The real data value is
derived from DINT and EXPO as follows:
Value
Real
= reading
DINT
× 10
(-EXPO)
Function number 8
Current gross value
Function number 9
Current net value, if tared; otherwise gross
Function number 10
Current tare value, if tared; otherwise 0
Function number 11
Reserved for internal use.
Function number 12
Reserved for internal use.
Function number 13
Reserved for internal use.
Function number 14
Max (Full scale deflection)
Function number 15
Reserved for internal use.
7.2.5.10
Function number 20 and 21: Parameter channel (Read/Write)
Function number 20
Parameter value
Function number 21
Parameter index
7.2.5.11
Function number 22…27: Limit value (Read/Write)
Function number 22
Limit 1 on
Function number 23
Limit 1 off
Transmitter Series PR 5211
7 ProfiBus interface
Minebea Intec
EN-70
Summary of Contents for PR 5211 Series
Page 95: ......
