Minebea Intec Maxxis 5 Phase PR 5900/81, Operating Instructions Manual

Page: 53 / 94

Outputs @admin
1 1
2 2
3 3
Option
Type
Output
SPM address %MX
Built-in
Digital output
4
25
Default Output- Save
Output 4 is conigured with address X25 and is active while the "Zucker" ("sugar")
component is active.
6.2.3 Example 2
In program PR 8400 (P), the following component is deined for WP
‑
A:
- The "Regler" ("stabilizer") component with batching mode A1 uses SPM output
address W199.
In the Phase-Controller, the analog value should be output directly by the analog output
card.
The value from the "Regler" ("stabilizer") component is then output as an analog signal.
6.2.4 Example 3
In program PR 8400 (P), the following component is deined for WP
‑
A:
- The manual "Hand" ("hand") component with batching mode D1 uses SPM input
address X26.
In the Phase-Controller, manual addition should be acknowledged with a digital input.
6 Application Phase PR 5900/81
Minebea Intec EN-51