Minebea Intec Maxxis 4 Installation Manual Download Page 36

Page: 36 / 112

Note:

For more information, see the manual for the Mettler scale.

4.5 Accessories

4.5.1

PR 5500/04 2x RS

‑‑

485 interface

The plug-in card contains two channels. One channel can be used for connecting an

IS platform without an external power supply.

Note:

Either the internal weighing point or an IS platform without an external power supply

may be used.

The RS

‑

485 interface can be selected and conigured in the Setup menu.

Using the RS

‑

485 interface is compulsory with a multi-point connection (Tristate status).

The RS

‑

485 interface can also be used as a point-to-point connection.

The card is inserted in the option 1/FB and/or option 2 slot.
A maximum of 2 PR 5500/04 cards can be installed.

Process Controller Maxxis 4 PR 5500

4 Device installation

EN-34

Minebea Intec

Summary of Contents for Maxxis 4

















































































































Search results

Summary of Contents for Maxxis 4

Reviews:

Related manuals for Maxxis 4

Brands by name

Popular brands

Minebea Intec Maxxis 4, Installation Manual

Search results

Summary of Contents for Maxxis 4

Reviews:

Related manuals for Maxxis 4

Brands by name

Popular brands