7.11.10 Example 3: Checkweighing
Checkweighing toward zero
. Checkweighing samples with a target weight of 1250 g and
a tolerance range from –10 g to +30 g.
Coniguration: The "Checkweighing" application [APP.ZERO] - [ON] (4.7.2)
"Checkweighing toward zero" is selected as well as the [INPUT] - [TAR.MN.MX] (4.5.1)
"Min, Max, target value" entry, and a printout has been set up (see chapter
1. Start target value and tolerance entry using the
key.
2. Place a sample with the target weight (in this example, 1250 g) on the platform.
3. Save the target value with
key.
4. Enter lower limit value (in this example, 1240 g).
5. Save the lower limit value with
key.
6. Enter upper limit value (in this example, 1280 g).
7. Save the upper limit value with
key.
Combics 2 Series Complete Scales Models CAW2P, CAW2S
7 Operating
EN-144
Minebea Intec
