Mine Site Technologies NS50, User Manual, Page: 60 / 126

Figure 24: Tracking configuration screen
There are four sections on the Tracking configuration screen:
Enable
This section turns tracking on or off.
Recommended Settings Description Field
On or Off. Indicates whether Tracking will be switched on
for this unit. Enable Tracking
RSSI Lower Thresholds
These settings are used to control what location reports are sent to the Positioning Engine. If a Wi-Fi tag
or mobile unit report is received with an RSSI below the relevant threshold, it is not sent to the Positioning
Engine (whether it is an AeroScout
®
Positioning Engine or MST Tracker Engine).
Tracker Engine List
This section is used to configure the MST Tracker Engine(s) that the access point will send information
to. The available settings are listed below. Note that data can be passed to up to 2 MST Tracker Engine
instances.
Recommended Settings Description Field
On or Off. Indicates whether the Tracker Engine will be sent
data. Enable
Specific to each site. The IP address of the MST Tracker Engine. Server Address
Default is 1142. The UDP port that the Tracker Engine listens for
messages on. Server Port
Revision A 60 NS50 User Manual
Configuration Using the Web Interface