Mine Site Technologies MinePhone MP10 Administrator'S Manual Download Page 27

Page: 27 / 74

Values

Description

Field

Enable

Disable

. By default

it is disabled.

Support for configuring another SIP server for
outbound calls.

Outbound
Proxy Mode

Outbound SIP server name or IP address.

Outbound
Server

Note:

This must be set to

be the same as the SIP
server name or IP address if
an outbound SIP server is
not used.

Outbound port number.

Outbound
Port

Note:

This must be set to

be the same as the SIP Port
if an outbound SIP server is
not used.

Default setting is

120

Time duration (in seconds) before the phone will
re-register to the SIP server.

3.3 Real Transport Protocol (RTP) Configuration

RTP settings, accessible via

Settings

Network

Signal Protocol

RTP

, define the streaming of

voice packet to and from the MinePhone. The RTP port options are described below. The MinePhone
must be restarted for changes to take effect.

Picture

Values

Description

Field

Default is

9090

Setting of up to 5 digits.

RTP port

MinePhone Administrator Guide

Revision E

Configuring Network Settings

Summary of Contents for MinePhone MP10











































































Search results

Summary of Contents for MinePhone MP10

Reviews:

Brands by name

Popular brands

Mine Site Technologies MinePhone MP10, Administrator'S Manual

Search results

Summary of Contents for MinePhone MP10

Reviews:

Brands by name

Popular brands