MindWare Wireless Data Center Hardware User Reference Guide
1020F Taylor Station Rd. Gahanna, OH 43230
8
Accessories and Consumables
2-Slot E-Prime Trigger Cable
Part #45-0030-00
Instructions:
-
Turn power to the Wireless Datacenter hardware off
-
Connect the DB9 with the pigtail RCA connector to the
Digital port
-
Connect the RCA connector to the Trigger jack
-
With a small slotted screwdriver, gently screw the DB9
connector into place
-
Connect the DB25 connector to the parallel port of the
computer with E-Prime installed
Desktop Kit
Part #50-6032-00
Instructions:
-
Turn power to the Wireless Datacenter hardware off
-
Unplug the power cable from the Wireless Datacenter
-
Attach feet to embedded nuts on bottom of unit using provided screws. Do not
over-tighten
2A T 250 V 5X20 mm Slow Blow Fuse
Part #55-0834-00
Instructions:
-
Turn power to the Wireless Datacenter hardware off
-
Unplug the power cable from the Wireless Datacenter
-
With a slotted screwdriver, turn the fuse holder and
remove the fuse from the chassis
-
Replace fuse and re-insert the fuse in to the fuse holder
