Mindray Z6, Service Manual

Page: 135 / 173

Care and Maintenance 9-3
9.2 Cleaning
9.2.1 Clean the System
9.2.1.1 Flow of Cleaning
Clean display
Clean trackball
Clean holders
Clean cover
Clean probe
Clean control panel
Power off and pull out the
power cables
Figure 9 - 1 View of Cleaning Maintenance
WARNING:
Before cleaning the system, be sure to turn off the power and
disconnect the power cord from the outlet. If you clean the system
while the power is “On”, it may result in electric shock.
9.2.2 Content
1. Clean Display

Tool: soft dry cloth ,clear water or mild soapy water

Method:
Surface of display should be cleaned with soft dry cloth. Remained stain should be washed out
by cloth with clear water or soapy water, and then air-dry the surface.
2. Clean Trackball

Tool: dry cloth, mild soapy water

Method: