BeneVision N1 Patient Monitor Operator’s Manual
6 - 5
6.7.2
Alarm Watch
The alarm watch function provides the alarm notification by color and sound.
■
The monitor sounds the highest priority alarm tone from all the monitored remote devices.
■
The moitor displays the highest priority alarm in corresponding background color for each bed at following
areas:
◆
At the top of the
Remote View
. For more information, see
for details.
◆
On the main screen. For more information, see
6.7.2.1 About Alarm Watch Tile
for details.
6.7.2.1
About Alarm Watch Tile
The main screen can display up to three alarm watch tiles, namely A-W1 and A-W2. Each tile can accommodate
up to six beds.
The following figure shows the alarm watch tiles.
The alarm watch tile is similar to alarm watch area in the
Remote View.
For more information, see
.
6.7.2.2
Displaying the Alarm Watch Tile on the Main Screen
To configure the alarm watch tile to be displayed on the monitor’s main screen, follow this procedure:
1.
Select the
Main Menu
quick key
→
from the
Display
column select
Choose Screen
to enter the
Screen
Setup
menu.
2.
Select the
Tile Layout
tab.
3.
Select the numeric area where you want to display the alarm watch tile, and then in the drop-down list,
select
Alarm Watch
→
A-W1
or
A-W2
.
(1)
(2)
(4)
(3)
(5)
(1)
Alarm watch tile label
(2)
One bed tile: when only one bed is assigned to a tile, the tile displays the parameter value and alarm message from
this bed, etc.
(3)
Select bed icon: select it to enter the
Select Bed
window.
(4)
More than one bed tile: when more than one bed is assigned to a tile, the tile displays the alarm status, connection
status, etc.
(5)
Disconnection icon: when the remote device is disconnected, this icon displays at the tile, and the tile background
color is red.