Mindray BeneView T8, Operation Manual

Page: 57 / 290

5-1
5
User Screens
5.1 Tailoring Your Screens
You can tailor your patient monitor’s screens by setting:
„ Waveform sweep mode
„
Wave line size
„ The color in which each measurement’s numerics and waveform are displayed
„ The parameter to be monitored.
Changing some settings may be hazardous. Therefore, those setting are password-protected
and can be modified by authorized personnel only. Once change is made, those who use the
patient monitor should be notified.
5.1.1 Setting the Waveform Sweep Mode
1. Select [
Main Menu
]
→
[
Screen Setup >>
].
2. Select [
Sweep Mode
] and toggle between [
Refresh
] and [
Scroll
].
‹ [
Refresh
]: The waveforms keep stationary, with real-time refreshing from left to
right by a moving “erase bar”.
‹ [
Scroll
]: The waveforms move from the right to the left with time passing by.
5.1.2 Changing the Wave Line Size
1. Select [
Main Menu
]
→
[
Maintenance >>
]
→
[
User Maintenance >>
]
→
enter the
required password.
2. Select [
Others >>
].
3. Select [
Wave Line
] and toggle between [
Thick
], [
Mediate
] and [
Thin
].
5.1.3 Changing Measurement Colors
1. Select [
Main Menu
] → [
Screen Setup >>
] → [
Measurement Color Setup >>
].
2. Select the color box next to your desired measurement and then select a color from the
popup menu.