Page 48 of 67
Place disc electrodes on to the four red snap-ons of the EXG sensor and place a disc electrode
on to the EXG ground snap-on.
Place the two black snap-ons of the EXG sensor which is connected to input A&B of the
NeXus-10 and input 25&26 of the NeXus-32 together with disc electrodes on to an ear clip.
Determine electrode positions according to the 10-20 system by using measuring tape and
marking positions with a skin marker.
Rub the skin with a cotton swab and Nuprep at all electrode positions. Remove remaining
gel with a tissue. As an alternative to using Nuprep, alcohol pads are sometimes used.
Use the clip of the EXG cable to attach the EXG sensor to prevent pulling of the cables.
