Mindeo CS3290-2D, User Manual

Page: 48 / 116

36
Character output restraint:
Printable character only- If this option is selected, the scanner will output the printable characters only,
i.e. in ASCII from 20H to 7EH.
Alphanumeric character only- If this option is selected, the scanner will output the alphanumeric
characters only, i.e.
“
A
”
-
“
Z
”
,
“
a
”
-
“
z
”
,
“
0
”
-
“
9
”
.
Decoder optimization: If it is enabled, the scanner will optimize the decoder with error correction. This
function is not effective for all types of barcodes.
Data output delay in continue-scan mode: If it is enabled, in the continue-scan mode, the scanner can
store the data while continue-scanning. The scanner will output the data after the predefined delay
elapsed. The maximum storage of data is 1000 characters. If this parameter is set to be
“
00
”
, the
scanner will not store data. And if the parameter is set to be
“
FF
”
, the scanner will output data after
stopping scanning.
Character encoding system: A character encoding system consists of a code that pairs each character
from a given repertoire. Common examples include Morse code, the Baudot code, the ASCII and
Unicode. If the data received does not display with the proper characters (e.g. domestic language), it
maybe because the barcode being scanned was created using a character encoding system that is
different from the one the host program is expecting. Try alternate options to find the proper one.
Multiple-scan setting
Single-scan setting
Option bar code Option Alpha. entry
Scanning mode
Good-read off 00
Momentary 01*
*
Alternate continue 02
Continue 03
Timeout off 04
Standby duration
01-99 (second)
01-99
04*
Same barcode delay time
00-FF
16
(50ms)
00-FF
16
08*
Double confirm
00-09
(00: no )
00-09
00*
*
Global max. code length for 1D
symbol
04-99
04-99