Note: 1. See user manuals for more information. 2. For better readability, please print this document with laser printer. 3. Version: CS2190_QG_EN_V1.3.
CS2190 Cordless Laser Scanner Quick Guide
Notice
Parts of the handheld unit
①
Exit window
②
Trigger (Press to triggr / Long press 2 seconds to turn on)
③
Beeper
④
Power indicator (Blue LED)
⑤
Successful decoding indicator (Green
LED) / Communication fail indicator (Red LED) / Charging (Red LED)
Parts of the cradle
⑥
Power indicator (Blue LED)
⑦
Communication indicator (Green LED)
⑧
Key (Long press 2 seconds to restore factory default
setting of cradle)
Installation of cradle
1. Switch off power of the host. Refer to the below pictures, connect the host with the scanner with
different cables firstly, and then connect the adaptor to the power socket.
2. Ensure that all connections are secure. Switch on the power of the host. After a few seconds, if
only the blue LED on the cradle is ON, it indicates the cradle is in normal working mode.
USB cable
RS232 cable
PS/2 keyboard cable
Charge battery
1.
Please charge the battery before the first time of use. The
charge indicator (Red LED) on the handheld unit is turned on
when the charging is in process. When the charging process
completes, the charge indicator (Red LED) is turned off.
2.
Charging time: 4 hours for fully charged.
3.
You can charge the battery via a USB port on the device or an
optional 5V adapter.
Indication of handheld unit for wireless data transmission
Successful Transmission
Beeper
Red LED
Vibration
Yes
Off
Off
Off
No
Three beeps
Blinks 3 times,
and then turns off
Short vibrates 3 times,
and then turns off
Programming instruction and example
Scan
“
SETUP
”
Scan
“
Option barcode
”
Scan
“
the 1st character of option
”
Scan
“
the 2nd character of option
”
Scan
“
END
”
Example: to set Flow control to be XON/XOFF.
Initialization settings and information display
Initialize all parameters of handheld unit
Initialize all parameters of cradle
Handheld unit firmware version display
Cradle firmware version display
Handheld unit radio setting display
Cradle radio setting display
Turn off handheld unit
Note
Note: 1) If you want to turn on the handheld unit again, please keep the trigger key being pressing for
2 seconds. 2) If you want to turn off the handheld unit via trigger key, please press and hold the
trigger key, after the laser beam turns off, wait for another 5 seconds, the handheld unit will be turned
off, then you can release the trigger key at this moment.
A standard kit contains: a handheld unit, a cradle, a USB cable, and a CD-ROM (containing
software and manuals).
It is suggested to read the user manual in details before use.
