Note: 1. See “CS-I series User Manual” for more information. 2. For better readability, please print this document with laser printer. 3. Version: 1.1.9.
Power on handheld unit
: Press the power button
on handheld unit for two seconds.
Power off handheld unit
: Press the power button
on handheld unit for two seconds.
Effective data communication range
To achieve longer communication range, avoids concrete, wall and metallic s
torage racks
between the barcode scanner and the base unit. Obstacle between the barcode scanner
and the base unit would decrease the communication severely. Test result is up to 200
meters for free space data communication range under the condition of clear weather,
temperature at 27℃,
visibility
of 5 kilometers.
Visual and audio indication of handheld unit for RF transmission
Successful Transmission
Audio (Beeper)
Red LED on handheld unit
Yes
None
Off
No
Three beeps
On
RF communication as clusters
Cluster 1
Cluster 2
Default setting of handheld unit
Default setting of base unit
Firmware version of handheld unit
Firmware version of base unit
RF communication setting for handheld unit
SETUP
Option barcode
Option
Alpha. entry
Handheld unit RF channel No.
01-08
01-08
06*
Handheld unit ID
01-16
01-16
01*
RF power level
10dbm to -15dbm
01-07
01*
Frequency hopping
Disable
Enable
00
01*
END
Note: 1) The factory default settings are indicated with asterisks (*); 2) Do change the
settings if multiple handheld units and base units are deployed in the same effective range.
Configuration example
A handheld unit is configured with channel 2, ID 15.
1) Scan “%SETUP”
6) Scan “%SETUP”
2) Scan “0701”
7) Scan “0702”
3) Scan “0”
8) Scan “1”
4) Scan “2”
9) Scan “5”
5) Scan “%%%END”
10)Scan “%%%END”
Configuration alphanumeric entry barcode
0
5
3
8
1
6
4
9
2
7
RF communication setting for base unit
Refer to “
Remote Scanner Management User Manual”
.
