Technical Support
Setup Process
1
2
7
Remove the end of the Stylus
Pen by twisting and pulling.
2
3
Insert N-cell battery into Stylus
Pen.
All mimio products include free phone and e-mail support.
Email: [email protected] (United States and Canada) or
[email protected] (Europe)
Telephone: 1-877-846-3721 (United States and Canada) or
+44 870 458 3366 (Europe)
Web Site: http://www.mimio.com/support
With all support inquiries, please provide us with the following information:
• mimio model number (located on the mimio serial number label)
• mimio software version number
• Operating system on computer
• Make and model of computer
• Description of problem
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference.
(2) this device must accept any interference received, including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment. Contact Sanford Corporation, 150 CambridgePark Drive, Cambridge, MA
02140. Technical Support: 877-846-3721.
Declaration of Conformity
Manufacturer’s Name:
Sanford Corporation
Manufacturer’s Address: 150 CambridgePark Drive
Cambridge,
MA
02140
USA
Declares that the product: Product Name: mimio Xi
Model
Number:
DMA-02
Conforms to the following standards:
Safety:
EN 60950:1992 +A1:1993 +A2:1993 +A3:1995 +A4:1997 +A11:1997, EN 60825-1:1994
EMC:
EN 61000-6-3:2001, EN 55022:1998, Class B (CISPR-22),
Immunity:
EN 61000-6-1:2001, EN 55024:1998 + A1:2001 + A2:2002,
EN 301 489-01 V1.4.1, EN 301 489-03 V1.4.1 using:
EN 61000-4-2:1995 + A1:1998, EN 61000-4-3:1995 + A1:1998, EN 61000-4-4:1995,
EN 61000-4-5:1995, EN 61000-4-6:1996, EN 61000-4-11:1994
The product is in conformity with the requirements of the General Product Safety Directive (92/59/EEC), the
Low-Voltage Directive (73/23/EEC), the EMC Directive (89/336/EEC, the Machinery Directive (89/392/EEC), and the
Product Liability Directive (85/374/EEC) and amendment (1999/44/EC).
Put appropriate Color Cap onto
the Stylus Pen by snapping it
into place. Align Color Cap
accordingly for the spring to
make contact with the battery.
