MIMAKI UJF-3042HG, Safety Precautions

Page: 7 / 20

7
Safety Precautions
Precautions for use
CAUTION
Protection against dust Periodic exchange parts
• It is strongly recommended to use the
machine in a room that is not dusty.
Set the Refresh level 2 or 3 when in bad
environment.
• When leaving the work place after the work-
ing hours, be sure to remove media from
the printer. If any media is left on the printer,
dust can put on it.
• Store media not to put dust on it. Wiping
dust off the media, dust will be put on the
media due to static electricity.
• Due to the dust on the head, ink drops will
fall down on the media during printing. If so,
be sure to clean up the head.
(
Operation Manual Chapter2 “Execution
of head cleaning”)
• There are some parts which must be period-
ically replaced. Contract with distributors or
dealers for maintenance.
Adjusting the level
• Keep this machine horizontal.
Handling of cleaning solution
• Be sure to store the cleaning solution in a
cold and dark place. Store the cleaning
solution in a place that is out of the reach of
children.
Warning labels Handling the antifreeze liquid
• Warning labels are adhered on this
machine.
Be sure to fully understand the warnings
given on the labels. In the case where any
of the warning label has become so soiled
that the warning message is illegible or has
come off, purchase a new one from your
local distributor or our office.
• Be sure to store the antifreeze liquid in a
cold and dark place.
• Store the antifreeze liquid in a place that is
out of the reach of children.
Ink cartridges
• If the ink cartridge is moved from a cold
place to a warm place, leave it in a place of
use for three hours or more and use it.
• Open the ink cartridge just before installing.
Leaving it open for a long time will cause
abnormal printing.
• Be sure to store ink cartridges in a cold and
dark place.
• Once the ink opened, be sure to use ink up
early. The ink passed for a long time after
opening the cartridge will lower the printing
quality.
• Using other than exclusive ink will break this
machine. In this case, repairing of this
machine is your responsibility.
• Never refill the ink cartridge with ink.
• Do not pound the ink cartridge nor shake it
violently. If so, ink may leak out of the car-
tridge.