6
When not using this plotter for a long time or according to environmental temperature, nozzle flashing
may become unstable. In this case, follow the procedure below to recover nozzle.
1.Daily care
Execute daily care all parts noted on this manual.
2.Normal cleaning (Operation manual Chapter 2 “Performing Head Cleaning”)
Execute normal cleaning along the operation manual after executed daily care.
Repeat cleaning and test printing, then confirm the nozzle clogging resolved.
3.Hard cleaning (Operation manual Chapter 2 “Performing Head Cleaning”)
If nozzle clogging cannot be solved even executed normal cleaning several times, change the clean-
ing mode to hard cleaning, and execute the same procedures.
4.Nozzle cleaning (Operation manual Chapter 4 “Cleaning the Head Nozzles”)
In case nozzle clogging or other problems can not be cleared away after all these procedures, exe-
cute nozzle cleaning.
The execute cleaning and test printing for one minute.
5.Nozzle cleaning (Operation manual Chapter 4 “Cleaning the Head Nozzles”)
In case nozzle clogging is not solved with nozzle cleaning above-mentioned, set the TIME to leave 5
minutes, and execute nozzle cleaning and test printing again.
6.Ink filling (Operation manual Chapter 4 “If nozzle clogging is not solved (ink
filling)”)
If nozzle clogging is not corrected after nozzle cleaning mentioned above, fill ink.
In case nozzle clogging is not resolved with all these procedures, contact with our customer service or
make service call to the agency you purchased.
When the operation of the printer is to be suspended for a week or more, use the [Strage Wash] func-
tion to clean the nozzles in the heads and the ink discharge passage.
After the cleaning, store the printer properly.
Clean stick (SPC-0527)
Ink-cleaning kit (SPC-0137)
7. How to recover improper nozzle flashing
8. When the operation of the printer is to be suspended for a long time
9. Supplies
