About installing this machine
3
About installing this machine
Where to Install This Machine
This optional kit is used with the Mimaki SIJ Series/UJV55-320 Inkjet Printer to ensure stable feeding of media on the
feeding side, where it is easy for the media to come loose.
The space required to install this optional kit on a Mimaki printer is shown in the following table.
When installing this optional kit, give careful consideration to the total size of the printer as well as the space required to
perform a print job.
Names of Parts and Functions
Rear Side and Right Side of the Machine
Width
Depth
The width of the printer
The depth of the p 70mm (Rear side)
• The 3.2m Roll shaft unit is shown in the figure below installed on a Mimaki UV Inkjet Printer “SIJ-320UV”.
3.2m Roll shaft unit
