MIMAKI JV400-130LX, Installation Manual

Page: 2 / 50

© 2014 MIMAKI ENGINEERING CO.,LTD.
Change Tracking P.1
Service Documents > Change Tracking
Change Tracking
Date 2013.04.30 Manual Ver. 2.2 Remark
Status Index Rev. Changes
Revised 5.1-P.1
-P.2
1.5 Illustrations of jointing are changed.
Revised 5.1-P.5 1.1 Work procedure for W ink using is changed.
Date 2013.10.10 Manual Ver. 2.1 Remark
Status Index Rev. Changes
Revised 2 1.3 Weight is changed..
Revised 4.2 1.1
1.2 Screw type is changed..
Revised 4.3 1.3 Screw type is changed..
Revised 4.4 1.3 Screw type is changed..
Added 5 1.3 6 color is added.
Added 5.1 1.4 6 color is added.
Revised 7.3 1.5 Work procedure is changed.Important is added.
Revised 7.6 1.2 Work procedure is changed.
Date 2013.04.15 Manual Ver. 2.0 Remark
Status Index Rev. Changes
Revised 3 1.2 Illustration is changed in accordance with heater change.
Revised 4 1.2 Illustration is changed in accordance with heater change.
Revised 4.2-P.6
4.2-P.7
4.2-P.9 1.1 Drying heater is changed and Finger guard is added.
Revised 4.3 1.2 Work procedure is changed in accordance with heater change.
Revised 4.4 1.2 Drying heater is changed and Finger guard is added.
Revised 4.5 1.2 Finger guard is added.
Added 4.6 1.0 New page is added.
Added 5 1.2 6 color is added.
Added 5.1 1.3 6 color is added.
Added 5.2 1.3 6 color is added.
Revised 6.1 1.2 Drying heater is changed and Finger guard is added.
Revised 7.3 1.4 Ink set is changed.
Revised 7.6 1.1 Work procedure is changed.
Date 2013.01.20 Manual Ver. 1.8 Remark
Status Index Rev. Changes
Revised 2 1.1 Specification for power supply is changed.
Revised 4 1.1 Caution for environmental of installation is added.
Revised 6.2 1.1 Caution is added.