MIMAKI JV33-160A Maintenance Manual Download

Page: 3 / 4

InkTec Monthly Maintenance Guide

InkTec Co., Ltd.

108, Neungan-ro, Danwon-gu, Ansan-si, Gyeonggi-do, 425-839, Korea

www.inktec.com

④

step, coat the tissue paper with SWA and clean the front

and back of the wiper.

* If the wipers are not cleaned regularly the nozzles can't be
recovered even after cleaning.

⑤

step, Drop SWA down into the CAP (

ⓐ

) and wipe it (

ⓑ

) to clean the CAP (

ⓒ

* If the CAP is not cleaned regularly, the drainage line can become clogged

After finishing the CAP clean, pour SWA into top of the

CAP until full.

⑥

step, set the wash time for ten minutes,

and click enter to perform the nozzle wash.

①

Summary of Contents for JV33-160A

Page 1: ...www inktec com Mimaki JV33 160A Printer InkTec SubliNova Ink User Monthly Maintenance Guide ...

Page 2: ... the Head Carriage Please follow the instruction below to move the head carriage Step 2 Cleaning the edge of a head After the head carriage is moved to the left Coat the cotton bud or cleaing stick with SWA to clean the plate around head If the heads are not cleaned regularly the condition will deteriorate Step 3 NOZZLE WASH 6 1 3 4 5 2 ...

Page 4: ...tep 4 Cleaning the Head Nozzle Coat the superfine fibre cloth lint free to clean the nozzles Wipe every nozzles up and down for ten minutes Note Do not wipe too hard because it can damage The Nozzles Step 5 Checking the nozzle Push enter key to return the head carriage where it was Perform cleaning cycle and check the nozzles ...